Room Switch-A-Roo Specific List:

• Help go through the boxes of supplies from the old classroom in the main room and find proper homes for them
• Remove anything from electronics that doesn't belong in electronics! Find the proper home for each item, do not just stick it somewhere else.

• Start Prepping the NEW Classroom

  • Wipe down the walls

  • Remove anything that doesn't belong to kid wind, the classroom, scouting or cosplay.
    • equipment boxes can be broken down
    • wood veneer shelves brought upstairs to member storage TEMPORARILY
    • what is in the grey bins?
    • ask Jennifer to find a new home for the wood folding shelf and blue metal chairs
    • folding chairs are staying in the basement 

  • pack up the resin printer supplies NICELY

  • build black metal shelf and place in between two silver shelves (because of the bulkhead)

  • hang 55" tv in the middle of the back wall

    • supplies for possibly mounting to concrete will be available

      •  

    
    

Room Specific Lists:

• NEW 3D Printing

  • Finish laying rubber tiles in the new 3D printing room

  • wet Swiffer the rubber tiles

• NEW Cosplay:

• NEW Electronics:

  • Paint walls

    • paint and supplies can be found at the top of the basement stairs or in the room if someone already finished that task.

• NEW Printmaking:

• Sewing & Craft Area:

• Main Room:

  • sweep and vacuum

  • Swiffer deep inside of laser
  • move the long table in the main room back to where it was and fix the supports on it

  • dust and wipe down all glass surfaces

    • this includes computer screens and the top of the laser cutter and UV printer

• Metal Shop

  • patch the large hole in the wall behind the jewelry bench (supplies labeled and on tall table in main room)

  • wipe down the jewelry bench and surrounding areas of red powder coating powder
  • empty trash
• Woodshop

  • vacuum floor and around machines

  • empty the trash cans

• Woodturning

  • vacuum floor and around machines

• Bathrooms

  • wipe down the sinks

  • dust bathroom vents

  • wipe down the toilets

  • Swiffer the floors

  • empty the trashcans

Building Specific List:

• Wipe down all windows

• in the room between wood lathe and woodshop, move shelving so it is flush with left wall, remove flammable box and everything on top of it (to where? help us decide)

• tape off area around breaker outside woodshop ( 15" horizontally from center of box on each side, and 36" from front of box, 6'6" tall)

  • Please use yellow and black hazard tape that can be found on tall table in main room
• repair the step at the back door
  • do we have supplies on hand?
  • paint steps red
• install molding at bottom of stairs
  •  (it should be somewhere shoved in the corner of cosplay)
• mount Mike Werling's American flag above the finishing room door.
  • please secure it well.
• sweep and swiffer stairs
• adhere rubber tiles to top and bottom of stairs
  • adhesive and tiles can be found on tall table in main room
• empty all shopvacs (CNC, woodshop, laser)
• wash the trash can lids
  • slop sink would work best & rags are in the supply closet
• drain all the compressors in the building (laser, woodshop, metal shop)
• Carry down the 5-gallon kilz paint bucket from top of stairs
• vacuum all carpeted areas
• carry short stools to new classroom in basement, only the short ones!
• move ceramics stuff to Purcellville ceramics room!!

If there is something you'd like to add to this list, please let Jessee M know on slack!