We currently (9/1/18) have 4 3D printers in the 3D printing room in MS-L. They each have their own method for printing.
MonoPrice IIIP is having bed leveling issues.
PrintrBot Plus is DOWN - hotend not heating.
FlashForge Creator PRO is working and leveled on 9/10/18.
Rostock is DOWN and unplugged. DO NOT USE. It needs a new controller board due to an electrical issue. It has been unplugged. (the good news is it works we know what is needed to fix it properly)
Slicer | Cura |
---|---|
File Type | gcode |
Material | PLA or ABS |
Interface | OctoPi @ http://10.3.0.75 |
UserId/Password |
Slicer | Cura |
---|---|
File Type | gcode |
Material | PLA or ABS |
Interface | Repetier @ http://10.1.1.21 |
UserId/Password | makersmiths/makesomething2day |
Slicer | FlashPrint |
---|---|
File Type | x3g |
Material | PLA or ABS |
Interface | OctoPi @ http://10.3.0.165 |
UserId/Password | ??? |
Slicer | |
---|---|
File Type | gcode |
Material | PLA or ABS |
Interface | Repetier @ http://10.1.1.21/ |
UserId/Password | makersmiths/makesomething2day |
This printer is hardwired to the desktop printing station. The bed leveling is software based in their MatterControl software and is easier to use from there. You can also use Simplify3D (on loan from Sean Devine) which has a direct print button on it.