This printer has been modified with a heated bed. Despite it's rugged looks, it is one of our most reliable printers.
For best results, use Ultimaker Cura with the following settings:
Go to Settings->Add Printer
Under Other select PrintrBot Simple Metal Extended
Click Add Printer
Plug in the power supply. It doesn't have a power switch.
This printer is equipped with a bed leveling sensor. If the extruder head bed clearance is more than 0.25mm then it needs to be adjusted. Please leave adjustments to the 3D printer admins.
Log In to the Repetier print server at http://10.1.1.21
Unplug the printer.
Place a prominent note on it describing the problem.
Let someone know through the #3dprinters channel on Slack.
|Resolution||100 microns (0.1mm)|
|Materials Supported||PLA, ABS|
|Connections||Repetier @ http://10.1.1.21|