...
- 3D Printing
wet Swiffer the rubber tiles
- Help brainstorm the best way to make the style legs we want
- CNC curved tabletop pieces
- cut down veneered pieces using the provided diagrams for table tops and shelves for the room.
Cosplay:
Printmaking:
Sewing & Craft Area:
Main Room:
- Move TV from next to the laser cutter to the back wall where the plug is on the wall.
- Please do not start until the IT committee chair is available since we will need to reconfigure the routers as well.
- Switch table next to laser copier with the Roland UV printer
- please don't start unless you have either UV printer steward with you!!! Jessee and John Carter will be around.
- Switch the UV printer computer stand and the laser copier
- Both of these need to be attached to ethernet, so please make sure the IT committee chair is around before doing this. Scott Silvers should be around
sweep and vacuum
- empty trash cans. Please be careful, they are pretty full.
dust and wipe down all glass surfaces
this includes computer screens, the top of the laser cutter, and the UV printer
- Move TV from next to the laser cutter to the back wall where the plug is on the wall.
New Classroom
- consolidate resin printers to one table (I'd prefer the one on the right)
- deconstruct the table on the left if possible
Metal Shop
- Dust/Wipe Down any equipment covered in red powder-coating dust.
Woodshop
vacuum floor and around machines
empty the trash cans
- If you can reach, vacuum on top of the dust collection tubes
Woodturning
vacuum floor and around machines
Bathrooms
wipe down the sinks
wipe down the toilets
Swiffer the floors
empty the trashcans
...