Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  • 3D Printing
    • wet Swiffer the rubber tiles

    • Help brainstorm the best way to make the style legs we want
    • CNC curved tabletop pieces
    • cut down veneered pieces using the provided diagrams for table tops and shelves for the room.
  • Cosplay:

  • Printmaking:

  • Sewing & Craft Area:

  • Main Room:

    • Move the TV from next to the laser cutter to the back wall where the plug is on the wall.
      • Please do not start until the IT committee chair is available since we will need to reconfigure the routers as well.
    • Patch up the wall where the tv use TV used to be.
      • Supplies for this will be on the tall table in the main room.
    • Switch the table next to the laser copier with the Roland UV printer
      • please don't start unless you have either UV printer steward with you!!! Jessee and John Carter will be around.
    • Switch the UV printer computer stand and the laser copier
      • Both of these need to be attached to ethernet, so please make sure the IT committee chair is around before doing this. Scott Silvers should be around
    • once the table is where the Roland uv UV printer used to be, move the sublimation printer, computer, heat presses, and accessories to that table.
      • The table that once held sublimation will now be a workbench where we will be putting pegboard behind it and the screwdrivers, spinning black holder, etc.
    • sweep and vacuum

    • empty trash cans. Please be careful, they are pretty full.
    • dust and wipe down all glass surfaces

      • this includes computer screens, the top of the laser cutter, and the UV printer

  • New Classroom

    • consolidate resin printers to one table (I'd prefer the one on the right)
    • deconstruct the table on the left if possible
  • Metal Shop

    • Dust/Wipe Down any equipment covered in red powder-coating dust. 
    • patch a large hole in the corner near the powder coating.
  • Woodshop

    • vacuum floor and around machines

    • empty the trash cans

    • If you can reach, vacuum on top of the dust collection tubes
  • Woodturning

    • vacuum floor and around machines

  • Bathrooms

    • wipe down the sinks

    • wipe down the toilets

    • Swiffer the floors

    • empty the trashcans

...