...
Spaghetti Detection: Automatically pauses if the print fails and begins extruding into the air.
Nozzle Clumping & Silicone Sock Detection: Uses the camera to verify the toolhead status before and during prints.
Build Plate Recognition: Scans the ArUco codes on the build plate to ensure the correct slicer settings are applied.
Technical Specifications
| Feature | Specification |
| Build Volume | 256 × 256 × 256 mm |
| Max Toolhead Speed | 600 mm/s |
| Max Acceleration | 20,000 mm/s² |
| Max Hotend Temp | 300°C (Hardened Steel Nozzle) |
| Max Bed Temp | 110°C |
| X-Axis Rails | Hollow Steel Rods (Replaces Carbon Fiber) |
| Nozzle System | Tool-free Quick-Swap (Compatible with H2 series) |
Multi-Material System: P2S Combo
...
Active Filament Drying: The AMS 2 Pro can heat up to 65°C, managed directly through the P2S interface.
Automatic Flow Calibration: Uses an eddy-current sensor in the toolhead to calibrate filament pressure and flow in real-time at the start of every print, eliminating the need for manual K-value tuning.
Software Ecosystem
The printer operates within a closed-but-integrated ecosystem:
Bambu Studio: A powerful slicer (based on PrusaSlicer/Slic3r) that handles project management and remote control.
Bambu Handy: A mobile app for remote monitoring via the internal camera, starting prints from MakerWorld, and receiving AI error alerts.
LAN Only Mode: For security-conscious users, the P2S supports printing over a local network without requiring cloud connectivity.