...
The blue parts bins stacked on the wall contain donated parts. You are free to use these parts, but be a good steward of these resources. If you experiment with a part, unless you are SURE it is undamaged, do not return it back to the bins. Please ask before using large numbers of parts. The intent is that these be available for electronics use, NOT as decorations for art projects (that said, if you need decorations for art projects, there are some select parts that might be suitable for such).
The radio shack bins under the bench belong to Brad Hess. Please consult him for permission before using any of the materials within.The parts on top of the bookshelf belong to Allon Stern. Please let him know if you need to use any parts - if you need one or two random bits, it's okay but if you need more than that, please let him know and make arrangements to pay for the parts or replenish them.
The following is the text of a Google doc that was created listing some of the resources in the Electronics Lab and in particular, in the black and yellow bin boxes on the shelf above the benches:
(4/20/23 Rats. The pictures didn't come across, so we'll have to add them soon.
...
| title | These links are no longer available |
|---|
..)
Resources in the Electronics Lab Listing:
In the gray drawers, nearest the wire spool rack:
Far Right, Lower Cabinet:
RF - Filters
Attenuators
Short RF Cables
RF mixers, Doublers
Detectors, Bias Tees
Small Amps
Couplers, Dividers, Hybrids
50ohm Loads / Terminators
Noise & Power Measurement
Isolators / Circulators
Middle Column, Lower Cabinet:
Proto Boards
RF Connectors (small)
Far Right, Upper Cabinet:
Mosfets (2 drawers)
Middle Column, Upper Cabinet:
Heat Shrink Tubing
Terminal Strips
LEDs (various colors and sizes)
LEDs On Leads
Header Strips (2 drawers
Circuit Breakers / Fuse Holders
Small MOLEX Connectors
Audio Plugs & Connectors
Ring Terminals / Barrel Connectors / USB Connectors
Far Left, Lower Cabinet:
????
????
LED Light Strips
8-segment Numeral Displays, Meter Displays, LED Strips
Empty
Empty
Capacitors
Capacitors
High Voltage Capacitors
Empty
Far Left, Upper Cabinet:
Panel Meters, Displays
Knobs
Trim Pots
Potentiometers
DIP Switches, 8 DIP Switches, Shaft Encoders
Toggle Switches
Buttons & Tactile Switches
Octal / BCD Thumbwheels
Power Relays & Sockets
In the gray drawers, nearest the entrance door:
Far Right Column:
Bumpers, Feet, Grommets
Rubber Feet & more Grommets
Component Heatsinks
Handles (small rectangular for project boxes)
Jumpers, Hook Up Wires
Cat-5 Patch Cables - 10’ snagless
Voice / Data Connectors (Jacks)
Middle Column:
Standoffs, Spacers
Jackscrews
Nylon Standoffs, Spacers
Nylon Screws / Nylon Nuts
Far Left Column:
Panel Mounting Hardware
Nylon Washers
Metal Nuts, Washers, PC Screws
In the Black Boxes with Yellow Tops:
RF Assemblies, Heat Sinks & Fans (for PC type enclosures)
Heat Sinks (Heavy Box!!!)
Mostly DB-? Connectors (DB-9, DB-25, and others) & some random stuff (with Picture)
Nuts, Bolts, Screws, Standoffs, Spacers
Lots of loose parts in small bottles
ICs in tubes. 100s of them.
RF Parts & Assemblies, LCD Panels, More ICs in tubes.
RF Power Supplies, Power Converters, Selectors, Transformers (heavy box)
Project Boxes (some used), misc. metal bits
BNC Connectors (100s of them), DB-9 connectors, DB-25 connectors, RF connectors, RCA Audio cables (heavy box)
Whole Box of Resistors (1000s of them. Yes, lots and lots of them!)
2nd Sort - Allon, Connectors (?)
Wire on Spools (Various gauge wire on spools)
Project Boxes, Thinflex Cable, Lamp Cord, Screws & Misc. Stuff
Project Boxes
Inductors, Capacitors, Limiters, 70’s era MOLEX Connectors
Drone (quadcopter) Hardware:
Box #1:
Flight controller
Four (4) carbon fabric blades on motors
Drone frame
Battery Charger
A few small batteries
Power Supply / Battery Charger?
Box #2:
Drone Frames
Audio Cables
A bunch of other stuff
Other Items:
...
| Item | Instructions | Owner | |
| MPJA 9333-PS Dual 3A 0-30V/5V@3A Fixed Power Supply | Manual is here: 9333ps.pdf | Allon Stern |
...