...
Ultimaker Cura is the slicer of choice for many open source-based 3D printers for it's relative ease of use
Recommend using v4.13.1 instead of latest 5.1.1 There are bugs in the 5 train of code that cause problems with layer thickness
| Skill Level | Novice to Advanced |
|---|---|
| Support formats | input: .stl, .obj, .3mf, .gcode, .g, .x3d, output: .stl, .gcode, .3mf, .ufp, .obj |
| Download | https://ultimaker.com/en/products/ultimaker-cura-software |
...
Elegoo has their own fork of Cura tuned for their printers. Recommend using v4.13.1 instead of latest 5.1.1 There are bugs in the 5 train of code that cause problems with layer thickness
| Skill Level | Novice to Advanced |
|---|---|
| Support formats | input: .stl, .obj, .3mf, .gcode, .g, .x3d, output: .stl, .gcode, .3mf, .ufp, .obj |
| Download | https://ultimakerwww.elegoo.com/en/products/ultimaker-cura-softwarepages/3d-printing-user-support |
Cura LulzBot Edition
Cura for LulzBot is an open source slicer based on Ultimaker Cura and tuned for LulzBot machines.
Latest version is 3.6.37, but there are issues with the installer. Install 3.6.23 first, then install 3.6.37
| Skill Level | Novice to Advanced |
|---|---|
| Support formats | input: .stl, .obj, .3mf, .gcode, .g, .x3d, output: .stl, .gcode, .3mf, .ufp, .obj |
| Download | https://www.lulzbot.com/support/cura |
PrusaSlicer
PrusaSlicer is open source and can be difficult to use. For advanced users it has fine-grained control and can produce excellent prints.
...