General Guidelines
- Do no use 2-3 flute endmills on steel
- Do no use ZRN or Other Aluminum coated endmills on steel. AKA if it is coated do not use. Gold is ZRN coated
- Do not use aggressive feeds and speeds. Keep it low and slow until you are 100% sure
- Do not take super light passes and grind away. This is bad for the endmill
- Most of the tools pre-loaded are for aluminum or plastic do not use them for steel. Over time we will add steel tools to the mix. For now please work with the Tormach manager
Tool Library Link (Always double check the tools as they can change on occasion)
Tools Loading into Holders
Tool Number | Description | Supplier | Model Number | Link for Purchase | Cost | Tool Type | Stick Out | Feeds and Speeds Details | Notes |
---|---|---|---|---|---|---|---|---|---|
T1 | 2in | Tormach | https://www.tormach.com/store/index.php?app=ecom&ns=prodshow&ref=38258&portrelay=1 | Fly Cutter | Aluminum 30 ipm/2500 fpm Steel do not use this tool on steel as it will break the insert | Set for 2in width of cut appoximatly | |||
T2 | .98430 | Tormach | https://www.tormach.com/store/index.php?app=ecom&ns=prodshow&ref=31258&portrelay=1 | 155.00 Inserts are $22.00 per set and only available in 10 packs | 25mm Center Indexing on Long shaft | Part number 31258 | |||
T3 | 3/8 Thread Mill | Tomach | 34696 | https://www.tormach.com/store/index.php?app=ecom&ns=prodshow&ref=34696 | 81.95 | Threadmill | Used for 3/8, 7/16, 1/2, M10, M12, M14 threads | ||
T4 | 3/8 Ball Endmill | ||||||||
T5 | 3/8 90 Degree Spot Drill | ||||||||
T6 | #7 Drill | ||||||||
T7 | 1/4 90 Degree Spot Drill | ||||||||
T8 | 1/2 90 Degree Center Drill | ||||||||
T9 | 17/64 Drill | ||||||||
T10 | 1/8 Flat Endmill | ||||||||
T11 | 1/8 Ball Endmill | ||||||||
T12 | 1/4 Flat Endmill | ||||||||
T13 | 7/64 Drill | ||||||||
T14 | 3/8 Flat Long | ||||||||
T15 | 3/8 Flat | ||||||||
T16 | #43 Drill | ||||||||
T17 | 1/8 Spot Drill | ||||||||
T18 | 3/16 Ball Endmill | ||||||||
T19 | 3/16 Flat Endmill |
Tool Library Link (Always double check the tools as they can change on occasion)
Tools Loading into Holders
Aluminum 30 ipm/2500 fpm
Steel do not use this tool on steel as it will break the insert
155.00
Inserts are $22.00 per set and only available in 10 packs
T12
T18
T19
T20 | Jacobs Chuck | ||||||||
T21 | .1405 Drill | ||||||||
T22 | 1/2 Flat Endmill | ||||||||
T23 | 1/2 Ball Endmill | ||||||||
T24 | #7 Drill | ||||||||
T25 | #17 Drill | ||||||||
T26 | 13/32 Drill | ||||||||
T27 | 1/4 Drill | ||||||||
T28 | 1/8 Drill | ||||||||
T29 | #45 Drill | ||||||||
T30 | #30 Drill | ||||||||
T31 | #40 Drill | ||||||||
T32 | #37 Drill | ||||||||
T33 | #47 Drill | ||||||||
T34 | 1/8 Slot Mill | ||||||||
T35 | 3/32 Slot mill | ||||||||
T36 | 1/16 Flat | ||||||||
T37 | |||||||||
T38 | |||||||||
T39 | |||||||||
T40 | |||||||||
T41 | |||||||||
T42 | |||||||||
T43 | |||||||||
T44 | |||||||||
T45 | |||||||||
T46 | |||||||||
T47 | |||||||||
T48 | |||||||||
T49 | |||||||||
T50 | Haimer Probe | ||||||||
T52 | Tapping Head | ||||||||
Tool Holder Images
L to R | Image |
---|---|
| |
| |
| |
| |
| |
| |
|
|
2.
3. Small
|
Spares/Inventory
.27 | Endmill | http://www.lakeshorecarbide.com/pdf/VFA.pdf | ||||||
1/8 2 flute ball ZRN Coated | 1 | Lakeshore | 340018XRF | http://www.lakeshorecarbide.com/18rougherfinishervariablefluteballendmillforaluminumzrn.aspx | 24.29 | Endmill | http://www.lakeshorecarbide.com/pdf/VFA.pdf | |
1/8 2 |
Flute Flat ZRN Coated |
5 | Lakeshore |
350018XRF |
https://www.lakeshorecarbide.com/ |
18rougherfinishervariable2fluteendmillforaluminumzrn.aspx |
16. |
47 | Endmill |
1/16 2flute Flat | 3 | Lakeshore | LC204-001020 | https://www.lakeshorecarbide.com/ |
116dia2flutereglengthendmilluncoated.aspx | 5.94 | Endmill | |
1/16 2 flute Ball TIALN |
Tools used for the Turners Cube Class
Tool Number | Size | Supplier | Model Number | Link for Purchase | Tool Type | Stick Out | Feeds and Speeds Details | Notes |
---|---|---|---|---|---|---|---|---|
T1 Superfly | 2 in | Tormach |
https://www.tormach.com/store/index.php?app=ecom&ns=prodshow&ref=38258&portrelay=1 |
Aluminum 30 ipm/2500 fpm Steel do not use this tool on steel as it will break the insert | Set for 2in width of cut appoximatly | |||
3/8 Rougher | 3/8 | Lakeshore | 320038XRF | http://www.lakeshorecarbide.com/38rougherfinishersquareendvariable2fluteendmillforaluminumzrn.aspx |
http://www.lakeshorecarbide.com/pdf/VFA.pdf |
1/4 | 1/4 | Lakeshore | 330014XRF | https://www.lakeshorecarbide.com/14rougherfinishersquareendvariable3fluteendmillforaluminumzrn.aspx |
http://www.lakeshorecarbide.com/pdf/VFA.pdf |