Room Steward: Geoffrey Hoffman,  Mark R Millsap 

Expert at large on radio equipment and instruments: Allon Stern (Allon Stern)

Overview

The Electronics Room provides a space where members can solder, use power supplies, oscilloscopes and small hand tools to build electronics projects, and find resources to help with their projects.

...

The blue parts bins stacked on the wall contain donated parts. You are free to use these parts, but be a good steward of these resources. If you experiment with a part, unless you are SURE it is undamaged, do not return it back to the bins. Please ask before using large numbers of parts. The intent is that these be available for electronics use, NOT as decorations for art projects (that said, if you need decorations for art projects, there are some select parts that might be suitable for such).

The radio shack bins under the bench belong to Brad Hess. Please consult him for permission before using any of the materials within.The parts on top of the bookshelf belong to Allon Stern. Please let him know if you need to use any parts - if you need one or two random bits, it's okay but if  you need more than that, please let him know and make arrangements to pay for the parts or replenish them.

TBD: THE EQUIPMENT LIST. This list will detail all the equipment in the room, documenting owners, and operating instructions. 

TBD: Electronics suppliers

The following is the text of a Google doc that was created listing some of the resources in the Electronics Lab and in particular, in the black and yellow bin boxes on the shelf above the benches:

(4/20/23  Rats.  The pictures didn't come across, so we'll have to add them soon...)

Resources in the Electronics Lab Listing

In the gray drawers, nearest the wire spool rack

Far Right, Lower Cabinet:

RF - Filters

Attenuators

Short RF Cables

RF mixers, Doublers

Detectors, Bias Tees

Small Amps

Couplers, Dividers, Hybrids

50ohm Loads / Terminators

Noise & Power Measurement

Isolators / Circulators

Middle Column, Lower Cabinet:

Proto Boards

RF Connectors (small)

Far Right, Upper Cabinet:

Mosfets (2 drawers)

Middle Column, Upper Cabinet:

Heat Shrink Tubing

Terminal Strips

LEDs (various colors and sizes)

LEDs On Leads

Header Strips (2 drawers

Circuit Breakers / Fuse Holders

Small MOLEX Connectors

Audio Plugs & Connectors

Ring Terminals / Barrel Connectors / USB Connectors

Far Left, Lower Cabinet:

????

????

LED Light Strips

8-segment Numeral Displays, Meter Displays, LED Strips

Empty

Empty

Capacitors

Capacitors

High Voltage Capacitors

Empty

Far Left, Upper Cabinet:

Panel Meters, Displays

Knobs

Trim Pots

Potentiometers

DIP Switches, 8 DIP Switches, Shaft Encoders

Toggle Switches

Buttons & Tactile Switches

Octal / BCD Thumbwheels

Power Relays & Sockets

In the gray drawers, nearest the entrance door:

Far Right Column:

Bumpers, Feet, Grommets

Rubber Feet & more Grommets

Component Heatsinks

Handles (small rectangular for project boxes)

Jumpers, Hook Up Wires

Cat-5 Patch Cables - 10’ snagless

Voice / Data Connectors (Jacks)

Middle Column:

Standoffs, Spacers

Jackscrews

Nylon Standoffs, Spacers

Nylon Screws / Nylon Nuts

Far Left Column:

Panel Mounting Hardware

Nylon Washers

Metal Nuts, Washers, PC Screws

In the Black Boxes with Yellow Tops

RF Assemblies, Heat Sinks & Fans (for PC type enclosures)

Heat Sinks (Heavy Box!!!)

Mostly DB-? Connectors (DB-9, DB-25, and others) & some random stuff (with Picture)

Nuts, Bolts, Screws, Standoffs, Spacers 

Lots of loose parts in small bottles

ICs in tubes.  100s of them.

RF Parts & Assemblies, LCD Panels, More ICs in tubes.

RF Power Supplies, Power Converters, Selectors, Transformers (heavy box)

Project Boxes (some used), misc. metal bits

BNC Connectors (100s of them), DB-9 connectors, DB-25 connectors, RF connectors, RCA Audio cables (heavy box)

Whole Box of Resistors  (1000s of them.  Yes, lots and lots of them!)

2nd Sort - Allon, Connectors (?)

Wire on Spools (Various gauge wire on spools)

Project Boxes, Thinflex Cable, Lamp Cord, Screws & Misc. Stuff

Project Boxes

Inductors, Capacitors, Limiters, 70’s era MOLEX Connectors

Drone (quadcopter) Hardware

Box #1:

Flight controller

Four (4) carbon fabric blades on motors

Drone frame

Battery Charger

A few small batteries

Power Supply / Battery Charger?

Box #2:

Drone Frames

Audio Cables

A bunch of other stuff 

Instruments, accessories and equipment

...

If you need to edit the page and formatting there are some instructions you could follow here