...
Post a message to the #3dprinting Slack Channel.
Direct message to the 3D Printing Steward (sometimes they also have their phone number in slack to call)
...
| Skill Level | Novice to Advanced |
|---|---|
| Support formats | input: .stl, .obj, .3mf, .gcode, .g, .x3d, output: .stl, .gcode, .3mf, .ufp, .obj |
| Download | https://ultimaker.com/en/products/ultimaker-cura-software |
PrusaSlicer
Elegoo Cura
Elegoo has their own fork of Cura tuned for their printers. PrusaSlicer is open source and can be difficult to use. For advanced users it has fine-grained control and can produce excellent prints.
| Skill Level | Intermediate Novice to Advanced |
|---|---|
| Support formats | input: .stl, .obj, .3mf, .gcode, .amfg, .3mfx3d, output: .stl, .gcode, .amf3mf, .3mfufp, .obj |
| Download | https://www.prusa3delegoo.com/page/prusaslicer_424/pages/3d-printing-user-support |
Cura LulzBot Edition
Cura for LulzBot is an open source slicer based on Ultimaker Cura and tuned for LulzBot machines.
Latest version is 3.6.37, but there are issues with the installer. Install 3.6.23 first, then install 3.6.37
| Skill Level | Novice to Advanced |
|---|---|
| Support formats | input: .stl, .obj, .3mf, .gcode, .g, .x3d, output: .stl, .gcode, .3mf, .ufp, .obj |
| Download | https://www.lulzbot.com/support/cura |
PrusaSlicer
PrusaSlicer is open source and can be difficult to use. For advanced users it has fine-grained control and can produce excellent prints.
| Skill Level | Intermediate to Advanced |
|---|---|
| Support formats | input: .stl, .obj, .amf, .3mf output: .stl, .gcode, .amf, .3mf, .obj |
| Download | https://www.prusa3d.com/page/prusaslicer_424/ |