We have both FDM (plastic filament based) printers and SLA (liquid resin based) printers
Our main printers are the new Ender 3 v2 printers at MSL. Very reliable and consistent, they have Octoprint servers on them to allow for easy web based access to the printers, print from your own laptop or the computers in the space, print it and leave ease of use. In addition there are two printers that have been optimized to print ABS ( a more finicky material), the Davinci XYZ, and the Lulzbot Mini.
At Purcellville (MSP) we have two deltabot printers (a circular bed instead of square) that have nice large build areas. These two printers were donated and use SD chips to get the print onto them. MSP also has a Lulzbot TAZ, an industrial, dual extrusion printer.
MSL has 3 SLA printers in the basement area. The Elegoo Mars was donated to the space by Elegoo, the Longer 10 Orange was donated by a friend of Tom Hill, and the Anycubic Mono X a next generation model that was part of the 2021 MSL Improvements purchase. There is also an elegoo Mercury X Wash and Cure station that was part of the MSL Improvements purchase.
MSP has a colocated EPAX X1K 6" Mono. As well as a Wash and Cure Station.
There are two certification courses for the printers, one for the FDM and one for the SLA. If you don't see an upcoming class, post a request to the 3D printing channel on slack. A certification class is required for independent use of the printers.
How to use theĀ Octoprint print server
Elegoo Mars (donated by Elegoo) | Longer 10 Orange | Anycubic Mono X | Elegoo Jupiter (Coming in June) | Epax E6 2K |
Printer | Bed Size | Height | Exposure Time | Speed | Slicer |
---|---|---|---|---|---|
Elegoo Mars | 129mm x 80mm | 150mm | 8-10sec | 22.5mm/hr | Chitubox, Lychee |
Longer 10 Orange | 98mm x 55mm | 140mm | 8-10sec | 30mm/hr | Longerware, Chitubox, Lychee |
Anycubic Mono X 4K | 192mm x 120mm | 245mm | 0.8-2sec | 60mm/hr | Photon Workshop, Chitubox, Lychee |
Elegoo Jupiter | 277mm x 156mm | 300mm | 0.8-2sec | 60mm/hr(?) | Chitubox, Lychee |
Epax E6 2K | 128mm x 81mm | 155mm | 2-4sec | 40mm/hr(?) | Chitubox, Lychee |
Ender3 v2 | Lulzbot Mini | Davinci XYZ | Lulzbot TAZ |
Printer | Bed Size | Height | Fliament | Speed | Print Method | Slicer |
---|---|---|---|---|---|---|
Ender3 v2 | 220x220 | 250 | PLA | 75-100mm/sec | Octoprint | Cura, Lychee |
Lulzbot Mini | PLA, ABS | USB | Cura for Lulzbot | |||
Davinci XYZ | PLA, ABS | SD Card | Cura, Lychee | |||
120x120 | 150 | PLA | Micro SD | Cura, Lychee | ||
FLSUN QQ-S Pro | PLA | Micro SD, USB | Cura | |||
PLA | Micro SD, USB | Cura | ||||
Lulzbot TAZ | PLA, ABS | Micro SD, USB | Cura for Lulzbot |