Table of Contents | ||
---|---|---|
|
Time and Location:
June 26, 2019at 7:00PM at 785 S. 20th Street, Purcellville, VA
Consent Agenda
Newly proposed agenda items appear in the consent agenda. Any member present at the meeting may pull an item out of the consent agenda for discussion, at which point it goes under "New Business". If nobody objects to the solutions presented by the consent agenda, everything in the consent agenda passes by consensus. Items that have more than one proposed solution should be moved to the "New Business" section.
Any member may edit this wiki page and place an item on the agenda. However, discussion of agenda items should be done via Slack. The cut-off time for addition to or revision of the consent agenda items is 48 hours prior to the meeting. Please note, agenda items (Consent, New, or Old) that request spending $250 or more must include a section on "Relevance to our tax exempt purpose".
CA1 Lack of Fire Extinguishers (Submitter Jessee Maloney)
Problem: There are not enough fire extinguishers and/or old ones. I checked the date on the extinguisher in the main room in Leesburg, and it was last checked in 1998. I feel like we should have at least two in each location and should make note of their locations during orientations.
Solution: purchase at least four new extinguishers
Relevance to our tax exempt status:
Motion: Acquire up to 10 rechargeable 5lbs ABC fire extinguishers at an amount not to exceed $400.00
CA2 Description (Submitter John Dubelko)
Problem: The president of Makersmiths needs limit their other duties within the organization.
Solution: See motion
Relevance to our tax exempt status: none
Motion: Appoint Jessee Maloney to Chairwomen of the New Member Orientation Committee and Diane Painter to Chairwomen of the Scheduling Committee.
Officer Reports:
Chairman
Secretary
Treasurer
Financial Statement View file name 2019 -05 Fin Report.pptx height 250
Member Reports:
Committee Reports:
New Member Orientation Committee (Chairperson John Dubelko)
Membership Committee (Vacant)
Social Outreach Committee: (Chairperson Jessee Maloney)
Leesburg Facility Committee (Chairperson Brad Hess)
Purcellville Facility Committee (Chairperson Tom Hill)
Scheduling Committee (Chairperson John Dubelko)
Special Projects Committee (Chairperson Mike Werling)
Welding Committee (Chairperson Arthur 'Skip' Smith)
Ceramics Committee (Chairperson Jen Netsch)
Newsletter Committee (Chairperson Erin Werling)
Old Business:
OB1 Description (Submitter's @name)
Problem:
Solution:
Relevance to our tax exempt status:
Proposed Motion:
OB2 Description (Submitter's @name)
Problem:
Solution:
Relevance to our tax exempt status:
Proposed Motion:
OB3 Description (Submitter's @name)
Problem:
Solution:
Relevance to our tax exempt status:
Proposed Motion:
New Business:
NB1 MS-P Welding Shop Access and Use (Submitter James Waldron)
Problem: Practice time in the PV Welding Shop. I've been teaching Basic Gas Welding classes and a question that comes up in every class is, 'OK, what do I have to do to come in and practice?' (I have advised students that there is no policy yet, and no practice is possible until the policy is promulgated.)
We have talked about several options. Monthly fee, session fee, specific welding nights, stewards must be present, additional per hour fee (like the laser cutter), no additional fees, and combinations of the above.
My personal feeling is that once you have taken the course and demonstrated proficiency (whatever that is), you should have open access to the welding shop (but not necessarily 'free'). We need to discuss this and any fees, prerequisites, and/or steward presence we feel is required.
Sorry to keep this so open, but we need to determine what conditions/fees we think are reasonable.
Proposal for Proficiency demonstration
Before independent use, candidate should demonstrate 'proficiency' to one of the shop stewards/leads. Each candidate should discuss the General section and the section covering the equipment he/she wants to use.
Demonstrate proficiency
Focus is safety
Should be non confrontational, teaching moment.
Notes or reference material allowed
Added to cert list on successful completion
General
Location of fire extinguisher
Safety considerations
Gas
Cylinder safety chained upright
How and how much to open cylinders
Regs, hoses, torch, tips.
Reg pressures
Pointing torch in safe direction
Striking
Flame adjust. Torch, cut, rosebud
Welding surfaces
Cleaning
Flux, braze
Rod selection
Clothing
Eye protection
Fume extractors
Shutting down
Coupon - make or show a weld you have done.
Plasma cutter
Machine settings
Shop or internal air
Ground
Spark safety. Hose out of way. Feet too
Edge
Pierce
Eye protection
Coupon
Shutting down
Stick
Clothing and eye protection
Machine settings
Ground
Electrode choice
Coupon
Shutdown
Mig
Machine settings
Wire and wire size
On off
Eye skin protection
Shielding gas choice
Gas on and flow
Stick out
Coupon
Shutting down
Spool gun?
Tig
On off
Eye skin protection
Shielding gas choice
Gas on and flow
Tungsten select and grind
Stick out
Settings
Filler rod selection
Coupon
Shut down
Solution: Some combination of the above.
Relevance to our tax exempt status: None.
Proposed Motion: That, whatever we decide, become the welding shop policy.
NB2 Description (Submitter's @name)
Problem:
Solution:
Relevance to our tax exempt status:
Proposed Motion:
NB3 Description (Submitter's @name)
Problem:
Solution:
Relevance to our tax exempt status:
Proposed Motion:
Adjournment
Minutes:
==Minutes= TTTT Call to Order
**NEW BUSINESS** <Date> at 7:00PM at 106 Royal Street NE, Leesburg, VA |
---|
Action Items:
Status | Item Description | Responsible Party |
---|---|---|
Approved Spending Tracking:
Amount | To | From |
---|---|---|