...

Will be creating fund raising income account for the October event (t-shirts and silent auction) and donations and expenses.

Recommend $20K to funds (10 each)

President:No Report

Bambu printer classes working,  19 people signed off, 2 extra instructors.  More classes on schedule.

Committee Reports:

Membership Committee (Ken Fuentecilla)

Octo has not yet renewed (corporate member)  Second request will be sent.

Other corporate member renews in November. (Mitre)

Marketing Committee (Vacant)

...

The town has had three roofing contractors out to assess roofing repairs. I left a message for Josh Goff to give me a progress report but haven’t heard back from him yet. I expect I’ll have more info before board meeting so will update when I hear something.

Purchase of replacement & new  equipment for MSP

The new band saw and table saw have arrived and are only waiting for the electric to be upgraded before we can install them.

The new miter saw was out of stock when I went to buy it but is available now. I should have it in Purcellville by the time the board meeting rolls around.

Most of the new tooling for the Bridgeport mill has arrived, we’re just waiting for a couple of stragglers to arrive.

Electrical Work and items discussed last month          

Correct wiring for lights in ceramics (boxes were left open, boxes are too small for number of wires in them. Add box extensions and covers) Done

Add 120v outlets for pottery wheels (Run a new circuit from new panel to ceramics room and provide two outlets on South wall) Work started but not yet completed

Add 220 v 3-phase outlet on Bridgeport mill for power feed (Find a box to mount on back of mill and run cord from box to wall outlet. Split power inside box to feed motor and run second line to outlet box for power feed) No progress

Add 220 v outlet for plasma cutter (turns out the plasma cooler requires a separate 220 v supply. Run wires from existing 220 outlet to a new box with outlet to service the cooler) No work done, sufficient receptacles already exist in area.

Add 220 v  3-phase outlet for Grob band saw ( expand existing box for mill and run two additional boxes, one for Grob Band saw and one for Wilton Drill Press) Not yet done – Waiting for final arrangement of machines in metal shop.

Fabricate and Install blade guides for Grob band saw Done

Replace clear siding on air compressor sheds for both buildings Not critical until winter

Fix small kiln in ceramic shop (programable controller is shot) We’ll take a look after the plasma cutter rebuild is completed

Source installation kit for LG mini-Split for lower building (Need copper tubing and electrical lines) Still researching availability

Run electric for Mini-Split for lower building (run a new 220 v line from Service panel in Kiln Room out through the back wall and over to the LG mini split) in progress

Replace missing insulation on refrigerant lines for mini-split in laser/frame shop. Need to obtain Insulation.

Still no movement on lawn mowing help for Purcellville. I’m looking for guidance from the Board on how to proceed.

Miter saw was backordered.  Will attempt consent in leiu.

New donation from Northrup, deburring machine.

Scheduling Committee (Jennifer Chu)

...