...
The Monoprice controller will take power from the Rasperry Pi over USB and appear to be operational even if the main power supply is turned off. If the printer will not heat, check the power switch on the power supply.
Specifications
Size | 210x210x200mm |
---|
Extruder | Single 0.4mm |
---|
Drive | Direct |
---|
Heated Bed | Yes |
---|
Resolution | 100 microns (0.1mm) |
---|
Filament | 1.75mm |
---|
Materials Supported | PLA, ABS |
---|
Formats |
---|
| Support
Makerbot Replicator 2 User supportmakerbottroubleshootingmakerbotreplicator2storemakerbotparts-accessories/ Parts and Supplies
| | | |
---|
BuildTak build surface | 6.5"x6.5" can be cut down to 5 1/8" x 6 1/4" | $20 (3) | MatterHackers |
Printer Parts |
|