We have both FDM (plastic filament based) printers and SLA (liquid resin based) printers at Purcellville.
We currently have four currently (8/31/18) have two 3D printers in the main room in MS-P. They each have their own method for printing.
12/14/21 Status
- All printers up and working
FDM Printers
 | |
|---|---|
| Ender3 v2 | |
|
|
| Longer LK5 | Elegoo Neptune 3 |
| Printer | Bed Size | Height | Filament | Print Method | Slicer |
|---|---|---|---|---|---|
| Ender-3 v2 | 220 x 220 | 250 | PLA | OctoPrint | Cura |
MakerBot
Replicator 2
| FLSUN QQ-S Pro | 255 | 360 | PLA | Micro SD | Cura |
| LulzBot TAZ Pro | 280 x 280 | 285 | PLA, ABS | USB | Cura for Lulzbot |
| Longer LK5 | 300 x 300 | 400 | OctoPrint | Cura | |
| Elegoo Neptune 3 | 220 x 220 | 280 | OctoPrint | Cura |
SLA Printers
|
|---|
| Anycubic Photon Mono X |
| Printer | Bed Size | Height | Exposure Time | Speed | Slicer |
|---|---|---|---|---|---|
| Anycubic Mono X 4K | 192mm x 120mm | 245mm | 0.8-2sec | 60mm/hr | Photon Workshop, Chitubox, Lychee | Anycubic Mono |
| Slicer | MakerBot Print | Cura | Cura | Photon Workshop | |
| File Type | x3g | gcode | gcode | .Photons | |
| Material | PLA or ABS | PLA or ABS | PLA or ABS | Resin | |
| Interface | USB or SD Card | USB or MicroSD Card | USB or MicroSD Card | MicroSD Card
Wash and Cure
We also now have a Wash and Cure station for the Resin printer.
...