We currently (8/31/18) have two 3D printers in the main room in MS-P. They each have their own method for printing.
12/14/21 Status
- All printers up and working
| Printer | MakerBotReplicator 2 | FLSun Q5 | FLSUN QQ-S Pro | Anycubic Mono |
|---|---|---|---|---|
| Slicer | MakerBot Print | Cura | Cura | Photon Workshop |
| File Type | x3g | gcode | gcode | .Photons |
| Material | PLA or ABS | PLA or ABS | PLA or ABS | Resin |
| Interface | USB or SD Card | USB or MicroSD Card | USB or MicroSD Card | MicroSD Card |
Wash and Cure
We also now have a Wash and Cure station for the Resin printer.
This allows you to place your resin model in the wash tub with alcohol, seal the tub and place it on the station. You can set a timer and it will automatically agitate the alcohol and stop at the set time. Once you are done cleaning it, you can place it on the turntable, set the timer and the UV lights will cure your model while spinning it to get all sides.
Do not dump used alcohol down the drain.