We have both FDM (plastic filament based) printers and SLA (liquid resin based) printers at Purcellville.
We currently have four currently (8/31/18) have two 3D printers in the main room in MS-P. They each have their own method for printing.
12/14/21 Status
- All printers up and working
FDM Printers
Printer | | | Anycubic MonoSlicerMakerBot PrintCura | Photon Workshop | File Type | x3g | gcode | gcode | .Photons |
---|
Material | PLA or ABS | PLA or ABS | PLA or ABS | Resin |
---|
Interface | USB or SD Card | USB or MicroSD Card | USB or MicroSD Card | MicroSD CardFLSun Q5 | 200 | 200 | PLA | Micro SD | Cura |
LulzBot TAZ Pro | 280 x 280 | 285 | PLA, ABS | USB | Cura for Lulzbot |
Longer LK5 | 300 x 300 | 400 |
| OctoPrint | Cura |
Elegoo Neptune 3 | 220 x 220 | 280 |
| OctoPrint | Cura |
SLA Printers
Image Added |
---|
Anycubic Photon Mono X |
|
Printer | Bed Size | Height | Exposure Time | Speed | Slicer |
---|
Anycubic Mono X 4K | 192mm x 120mm | 245mm | 0.8-2sec | 60mm/hr | Photon Workshop, Chitubox, Lychee |
Wash and Cure
We also now have a Wash and Cure station for the Resin printer.
...