Description
Instructions
Turning it On
Leveling the Bed
Loading and Unloading Filament
Printing
Cleaning
Specifications
Size | |
---|---|
Extruder | Single 0.4mm |
Drive | Direct |
Heated Bed | Yes |
Resolution | 100 microns (0.1mm) |
Filament | 1.75mm |
Materials Supported | PLA, ABS |
Formats | |
Software | Cura |
Connections | Octopi @ http://10.3.0.75 |
Support
MakerSmiths | Mike O'Brien |
---|---|
Manual | Makerbot Replicator 2 User Manual |
OEM Support | https://support.makerbot.com/troubleshooting/makerbot-replicator-2 |
OEM Parts | https://store.makerbot.com/parts-accessories/ |
Parts and Supplies
Item | Notes | Cost | Source |
---|---|---|---|
BuildTak build surface | 6.5"x6.5" can be cut down to 5 1/8" x 6 1/4" | $20 (3) | MatterHackers |
Printer Parts | Thor 3D |