We currently (9/1/18) have 4 3D printers in the 3D printing room in MS-L. They each have their own method for printing.
9/
...
19/18 Status
MonoPrice IIIP is having bed leveling issuesworking and leveled on 9/19/18.
PrintrBot Plus is DOWN - hotend not heatingworking and leveled on 9/19/18.
FlashForge Creator PRO is working and leveled on 9/10/18.
Rostock is DOWN and unplugged. DO NOT USE. It needs a new controller board due to an electrical issue. It has been unplugged. (the good news is it works we know what is needed to fix it properly)working and leveled on 9/19/18.
MonoPrice IIIP (Also known as the MonoPrice Select Plus)
| Slicer | Cura |
|---|---|
| File Type | gcode |
| Material | PLA or ABS |
| Interface | OctoPi @ http://10.3.0.75 |
| UserId/Password |
PrintrBot
...
Simple Metal Extended
| Slicer | Cura |
|---|---|
| File Type | gcode |
| Material | PLA or ABS |
| Interface | Repetier @ http://10.1.1.21 |
| UserId/Password | makersmiths/makesomething2day |
...