Time and Location:

Insert the time and location of the meeting here.

Call to Order:

Meeting called to order by (NAME HERE) at (TIME HERE).

Consent Agenda

Any Board Member may make a motion in the Consent Agenda.  The purpose of the Consent Agenda is to propose motions that have been discussed by Board Members in advance and/or are expected to pass without objection.  If the item does not fit this description, it should be proposed in New Business. Discussion of Consent Agenda items should be done via Slack prior to the meeting.  Any Board Member present at the meeting may request that an item be moved from the Consent Agenda to New Business.  The motions in the Consent Agenda (after any items are moved to New Business) may be passed as a group if there are no objections.   The cut-off time for addition to or revision of a Consent Agenda motion is 48 hours prior to the meeting. Any motion that requests spending $250 or more must include a section on "Relevance to our tax exempt purpose".

CA1: TITLE (Person Proposing)

Issue:

Solution:

Relevance to Tax Exempt Status:

Motion:

CA2: TITLE (Person Proposing)

Issue:

Solution:

Relevance to Tax Exempt Status:

Motion:

CA3: TITLE (Person Proposing)

Issue:

Solution:

Relevance to Tax Exempt Status:

Motion:

Approval of Prior Minutes

2021-09-29 Meeting of the Board of Directors

Vote:

Officer Reports

Chairperson:

INSERT REPORT HERE

Secretary:

INSERT REPORT HERE

Treasurer:

Committee Reports:

Website Committee (Jessee Maloney)

Membership Committee (Scott Newman)

Leesburg Facility Committee (Jessee Maloney)

Purcellville Facility Committee (Tom Hill)

Scheduling Committee (OPEN)

Special Projects Committee (OPEN)

Welding Committee (Skip Smith)

Newsletter Committee (Melissa Kowalski)

IT Committee (Michael James)

Video Committee (Squirrl McClintock)

Custom Frame Shop Committee (Teresia Scott)

Radio Club Committee (Allon Stern)

Marketing Committee (Scott Newman - Acting Chair)

Unfinished Business

There is no Unfinished Business from the previous meeting.

New Business

NB1: Disbanding of Welding and Blacksmithing Committees (John Dubelko)

Issue: Welding and blacksmithing committees have setup their respective areas and are in more of a caretaker mode now. 

Solution: Disband the committees and have a stewards appointed by the president. Skip Smith and Squirrl McClintock will have agreed to be the stewards of their respective areas.

Relevance to Tax Exempt Status: None

Motion: Disband the Welding and Blacksmithing committees. Appoint Skip Smith as the Welding shop steward and Squirrl McClintock as the Blacksmithing steward.  The Board Secretary will update the list of the active committees on the Makersmiths Wiki according to the Standing Rules.

NB2: Leesburg Woodshop Dust Collection Funding (Michael DeWan)

Issue: The dust collection system at Leesburg is severely under powered which has led to excessive dust being spread over shop and frequent needs for me to clean out clogged ducts. We have a more powerful unit (twice the capacity) sitting idle because it needs a 240V circuit. This circuit is on the list of power upgrades presented in the September  special Board meeting but action has been deferred indefinitely. In addition to the dust collector circuit the wood shop has experienced other circuit overloads that tripped circuit breakers while members had wood in the middle of a process on the drum sander, planer, or table saw. these unplanned outages can be dangerous and will cause a members material or project loss. 

Solution: We can't wait for the resolution of the full Leesburg power upgrade project. I am asking that funds be allocated to complete the woodshop electral  upgrades that were in the recent full Leesburg power upgrade request to be done independent of the larger whole building project. In addition to  funding the power upgrade some reconfiguration of the dust collection piping will be necessary to connect the replacement dust collector in the amount of  $125.

Based on the estimates from the initial bids the costs are:

240 volt dust collector circuit   20 A with NEMA  6-20 receptacle  $450
2 new 20 amp 120V circuits          $400
restore 2 dead 20A 120V circuits  $360
Additional piping components to redesign the dust collection system (PVC pipe, flex pipe. and connection joints)    $125

Total cost estimate $1335.00

Relevance to Tax Exempt Status:

Motion: Move to approve funding of $1,335.00 for electrical and dust collection upgrades to Leesburg woodshop.

NB3:

Approve Updates to the Bylaws and Standing Rules (Jonathan White)

Issue: Updates to Bylaws and Standing Rules are required to be in line with the activities of the organization.

Solution: Updates include the following changes:

Bylaws:

4.1.3 Covers that the Board will have 7 Directors and that this number can be changed by majority vote.  The Articles of Incorporation leave it to the Bylaws to establish the number of Directors.

4.11 Covers that site managers shall be the chairperson of the respective site committee and added that general site shop supplies budgets are controlled by the site manager.

Standing Rules:

Section 3 added that all Membership fees changes must be approved by the Board and communicated to Members at least 3 months in advance of taking effect.

Section 5: Specific named committees may have fewer than three members without being disbanded and that if a committee drops below 3 members that it has 30 days to get back to 3 members or it is dissolved.

Section 8: Presenters/instructors/organizers should make efforts to limit the impact of their class on other members' activity in the space and that those classes/workshops/events have priority in the space.

Relevance to Tax Exempt Status: None

Motion: Motion to approve Bylaws and Standing Rules as attached to this Agenda.

NB4: Change Date of November and December Board Meetings (Jonathan White )

Issue: The last Wednesday of the months of November and December fall inconveniently with holidays.

Solution: Schedule Board Meetings one week earlier in November and December.

Issue:

Solution:

Relevance to Tax Exempt Status: None

Motion:  Move to hold the November Board Meeting on November 17th at 7:00PM and the December Board Meeting on December 15th at 7:00PM.

Open Discussion

Adjournment

Meeting adjourned by NAME at TIME