FDM Printing
At Leesburg there are 6 FDM printers available. There are 2 Ender3-v2s, 2 Elegoo Neptune 3s, an FLSun Q-5 and a Longer LK5 Pro.
FDM Printers
Printer | Bed Size | Height | Print Method | Slicer |
---|---|---|---|---|
Ender-3 v2 | 220 x 220 | 250 | OctoPrint | Cura |
200 | 200 | Micro SD | Cura | |
LulzBot TAZ Pro | 280 x 280 | 285 | USB | Cura for Lulzbot |
Longer LK5 | 300 x 300 | 400 | Micro SD | Cura |
Elegoo Neptune 3 | 220 x 220 | 280 | Micro SD | Elegoo Cura |
SLA Printing
MS-L has 3 SLA printers in the basement area. The Elegoo Mars was donated to the space by Elegoo, and the Anycubic Mono X was part of the 2021 MS-L Improvements purchase. There is also an Elegoo Mercury X Wash and Cure station that was part of the MS-L Improvements purchase.
How to use the OctoPrint print server
Elegoo Mars (donated by Elegoo) | Anycubic Photon Mono X | Elegoo Jupiter |
Printer | Bed Size | Height | Exposure Time | Speed | Slicer |
---|---|---|---|---|---|
Elegoo Mars | 129mm x 80mm | 150mm | 8-10sec | 22.5mm/hr | Chitubox, Lychee |
Anycubic Mono X 4K | 192mm x 120mm | 245mm | 0.8-2sec | 60mm/hr | Photon Workshop, Chitubox, Lychee |
Elegoo Jupiter | 277mm x 156mm | 300mm | 0.8-2sec | 30-70mm/h | Chitubox, Lychee |
We currently (9/1/18) have 4 3D printers in the 3D printing room in MS-L. They each have their own method for printing.
9/10/18 Status
MonoPrice IIIP is having bed leveling issues.
PrintrBot Plus is DOWN - hotend not heating.
FlashForge Creator PRO is working and leveled on 9/10/18.
Rostock is DOWN and unplugged. DO NOT USE. It needs a new controller board due to an electrical issue. It has been unplugged. (the good news is it works we know what is needed to fix it properly)
MonoPrice IIIP (Also known as the MonoPrice Select Plus)
Slicer | Cura |
---|---|
File Type | gcode |
Material | PLA or ABS |
Interface | OctoPi @ http://10.3.0.75 |
UserId/Password |
PrintrBot Plus
Slicer | Cura |
---|---|
File Type | gcode |
Material | PLA or ABS |
Interface | Repetier @ http://10.1.1.21 |
UserId/Password | makersmiths/makesomething2day |
FlashForge Creator Pro
Slicer | FlashPrint |
---|---|
File Type | x3g |
Material | PLA or ABS |
Interface | OctoPi @ http://10.3.0.165 |
UserId/Password | ??? |
Rostock MAX v2 (Also called Delta Bot, SeeMeCNC)
Slicer | |
---|---|
File Type | gcode |
Material | PLA or ABS |
Interface | Repetier @ http://10.1.1.21/ |
UserId/Password | makersmiths/makesomething2day |
...