Page tree
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 14 Next »

The 3D printers at MS-L (Leesburg) and MS-P (Purcellville) are lovingly maintained by a crew of not-so-magical elves. To keep this mash-up of commercial and frankensteined printers running is no small feat. Please read and follow the guidelines on this page and in this section to help us keep them running.

There is work on updating how to use the 3D printers, so please reference the 3d Printer Room Plans for more information

Safety Rules

Do not leave your print unattendedWatch your print at all times. Things can go horribly wrong quickly.
Use care around heated beds and hot ends3D printers use heat had have HOT parts

Watch your spool for jams

Jammed filament ain't no fun for nobody.

When things go horribly wrong tell someone

If we know what happened we have a better chance to fix it...or prevent it next time.

Use care around heated beds and hot ends

3D printing uses heat. Heated beds can be up to 100°C and hot ends up to 250°C. If not careful you will get burned.

Do not attempt to adjust the printers

If you don't know what you're doing you can cause more harm than good. There is a support contact for each printer, or post your issue to the #3dprinting Slack channel.

Do not change the printer's EEPROM settings

Your changes may work for you but mess it up for others. 

Keep metal objects (spatulas, pliers) away from the nozzle

Metal tools can scratch or damage soft brass print nozzles and other parts.

Cancel your job immediately in case of unusual noises or smells!

Use common sense...if it sounds like ball bearings in a washing machine then it's probably not working right.
When (not if) the printer breaks...
  • Unplug it
  • Place a note on it
  • Let us know through  the #3dprinting Slack channel
  • ...and don't sweat it. Printers break all the time.

TOP

Beginning 3D Printing

Before using the 3D printers, please attend a 3D Printing Basics class. If none is scheduled post a note to the #3dprinting Slack channel. The slides for the class can be viewed here.

Troubleshooting

3D printing can be difficult. If you experience problems there are folks who can help. First, review the guides here and for the specific printer. If you still have a problem, post to the #3dprinting Slack channel.  Even if you find the solution, let us know, so that we can be aware that it might be an issue for others, and try to prevent it from happening again.

Software

Ultimaker Cura

Cura is the slicer of choice for many 3D printers based on open source platforms. Cura support STL files as input, and outputs GCode. It has built-in profiles for many printers. 

Cura does not support FlashForge or MakerBot printers.

Skill LevelNovice to Advanced
Supported PrintersPrintrBot, Monoprice, Malyan
Unsupported PrintersFlashforge, Makerbot
Support formats

input: .stl, .obj, .3mf, .gcode, .g, .x3d,

output: .stl, .gcode, .3mf, .ufp, .obj

Downloadhttps://ultimaker.com/en/products/ultimaker-cura-software

Slic3r

Slic3r is open source and can be difficult to use. For advanced users it has fine-grained control and can produce excellent prints.

Skill LevelIntermediate to Advanced
Supported PrintersPrintrBot, Monoprice, Malyan
Unsupported PrintersFlashforge, Makerbot
Support formats

input: .stl, .obj, .amf, .3mf

output: .stl, .gcode, .amf, .3mf, .obj

Downloadhttp://slic3r.org/download

FlashForge FlashPrint

Skill LevelNovice+
Supported PrintersFlashForge
Unsupported PrintersAll others
Support formats

 

Downloadhttp://www.flashforge.com/support-center/flashprint-support/

MakerBot Print

Skill LevelNovice+
Supported PrintersMakerBot, FlashForge
Unsupported Printers 
Support formats

 

Downloadhttps://www.makerbot.com/3d-printers/makerbot-print/download/

MatterControl

MatterControl is the most flexible of the software listed here. It's open source and easily extensible via custom printer profiles. 

"MatterControl is a free, open-source, all-in-one software package that lets you design, slice, organize, and manage your 3D prints. With MatterControl, you can design your parts from scratch using the Design Tools, or visit the Design Apps to browse existing projects. You can also slice your designs using a variety of advanced settings for customized support generation, software bed leveling, and integrated controls for dual extrusion using powerful 64-bit processing. When you have all the variables managed, you can print straight from MatterControl - no need for multiple programs - MatterControl does it all."

Skill LevelNovice+
Supported PrintersPrintrBot, Monoprice, Malyan, FlashForge, MakerBot
Unsupported PrintersCustomizable
Support formats

input: .stl, .amf, .zip, .gcode

output: native printer format for supported printers

Downloadhttps://www.matterhackers.com/store/l/mattercontrol/sk/MKZGTDW6
  • No labels