Description
The MakerBot Replicator 2 makes solid, three-dimensional objects out of melted MakerBot PLA Filament. Your 3D design files are translated into instructions for the MakerBot Replicator 2 and sent to the machine via USB cable or SD Card. Then the MakerBot Replicator 2 heats the MakerBot PLA Filament and squeezes it out through a nozzle to make a solid object layer by layer. This method is called Fused Filament Fabrication [FFF].
Instructions
Turning it On
Leveling the Bed
Loading and Unloading Filament
Printing
Cleaning
Support
Parts and Supplies
Item | Notes | Cost | Source |
---|---|---|---|
BuildTak build surface | 6.5"x6.5" can be cut down to 5 1/8" x 6 1/4" | $20 (3) | MatterHackers |
Printer Parts | Thor 3D |