We currently (9/1/18) have 4 3D printers in the 3D printing room in MS-L. They each have their own method for printing.
9/10/18 Status
MonoPrice IIIP is having bed leveling issues.
PrintrBot Plus is DOWN - hotend not heating.
FlashForge Creator PRO is working and leveled on 9/10/18.
Rostock is DOWN - extruder motor is not extruding.
MonoPrice IIIP (Also known as the MonoPrice Select Plus)
Slicer | Cura |
---|---|
File Type | gcode |
Material | PLA or ABS |
Interface | OctoPi @ http://10.3.0.75 |
UserId/Password |
PrintrBot Plus
Slicer | Cura |
---|---|
File Type | gcode |
Material | PLA or ABS |
Interface | Repetier @ http://10.1.1.21 |
UserId/Password | makersmiths/makesomething2day |
FlashForge Creator Pro
Slicer | FlashPrint |
---|---|
File Type | x3g |
Material | PLA or ABS |
Interface | OctoPi @ http://10.3.0.165 |
UserId/Password | ??? |
Rostock MAX v2 (Also called Delta Bot, SeeMeCNC)
Slicer | |
---|---|
File Type | gcode |
Material | PLA or ABS |
Interface | Repetier @ http://10.1.1.21/ |
UserId/Password | makersmiths/makesomething2day |
This printer is hardwired to the desktop printing station. The bed leveling is software based in their MatterControl software and is easier to use from there. You can also use Simplify3D (on loan from Sean Devine) which has a direct print button on it.