We have both Fused Deposition Modeling (FDM) and Stereolithography (SLA) printers at Makersmiths.
Please read and follow the guidelines on this page and in this section to help us keep them running.
To Get Help
Post a message to the #3dprinting Slack Channel.
Direct message to the 3D Printing Steward (sometimes they also have their phone number in slack to call)
Safety Rules
Use care around heated beds and hot ends | 3D printers use heat had have HOT parts |
---|---|
Watch your spool for jams | Jammed filament ain't no fun for nobody. |
When things go horribly wrong tell someone | If we know what happened we have a better chance to fix it...or prevent it next time. |
Use care around heated beds and hot ends | 3D printing uses heat. Heated beds can be up to 100°C and hot ends up to 250°C. If not careful you will get burned. |
Do not attempt to adjust the printers | If you don't know what you're doing you can cause more harm than good. Contact the steward or post your issue to the #3dprinting Slack channel. |
Do not change the printer's EEPROM settings | Your changes may work for you but mess it up for others. |
Keep metal objects (spatulas, pliers) away from the nozzle | Metal tools can scratch or damage soft brass print nozzles and other parts. |
Cancel your job immediately in case of unusual noises or smells! | Use common sense...if it sounds like ball bearings in a washing machine then it's probably not working right. |
When (not if) the printer breaks... |
|
Beginning 3D Printing
Before using the 3D printers, please attend a 3D Printing Basics class. If none is scheduled post a note to the #3dprinting Slack channel. The slides for the class will be available soon.
Troubleshooting
3D printing can be difficult. If you experience problems there are folks who can help. First, review the guides here and for the specific printer. If you still have a problem, post to the #3dprinting Slack channel. Even if you find the solution, let us know, so that we can be aware that it might be an issue for others, and try to prevent it from happening again.
Software
Ultimaker Cura
Ultimaker Cura is the slicer of choice for many open source-based 3D printers for it's relative ease of use
Skill Level | Novice to Advanced |
---|---|
Support formats | input: .stl, .obj, .3mf, .gcode, .g, .x3d, output: .stl, .gcode, .3mf, .ufp, .obj |
Download | https://ultimaker.com/en/products/ultimaker-cura-software |
PrusaSlicer
PrusaSlicer is open source and can be difficult to use. For advanced users it has fine-grained control and can produce excellent prints.
Skill Level | Intermediate to Advanced |
---|---|
Support formats | input: .stl, .obj, .amf, .3mf output: .stl, .gcode, .amf, .3mf, .obj |
Download | https://www.prusa3d.com/page/prusaslicer_424/ |
Cura LulzBot Edition
Cura for LulzBot is an open source slicer based on Ultimaker Cura and tuned for LulzBot machines.
Skill Level | Novice to Advanced |
---|---|
Support formats | input: .stl, .obj, .3mf, .gcode, .g, .x3d, output: .stl, .gcode, .3mf, .ufp, .obj |
Download | https://www.lulzbot.com/support/cura |