Disclaimer: information on this page has not been independently verified, use at your own risk, your mileage may vary.
Note, if you are using the Personal Use (free) version of Fusion that it will not export all the tools into a single G-code file. you must cat the files together.
Header:
Delete all lines from top to
G90 (Use absolute positioning)
T0 (Tells the machine to stop spindle, unload tool, and position spindle at the back of the machine.)
M12C7 (Turn the vacuum off)
M2 (Tells WINCNC that its the end of the program)
M11C4 (Air blast cooling for spindle on)
M11C2 (Dust hood down)
G04 (Tells the machine to wait for the Enter key to be pressed before beginning the job)