Description
The M200 is an inexpensive printer made in China. It's very similar to the Monoprice Mini.
How To Print
Set up the printer in Cura as a Malyan M200
Prepare your print
Save to MicroSD
Insert the MicroSD card into the printer
Use the knob to print from the SD card (screen is not touch-sensitive)
Specifications
| Max Print Size | 120x120x120mm |
|---|---|
| Extruder | Single 0.4mm |
| Drive | Bowden |
| Heated Bed | Yes |
| Resolution | 0.1mm |
| Filament | 1.75mm |
| Materials Supported | |
| Formats | STL, OBJ |
| Software | Cura, Repetier-Host |
| Connections | USB, MicroSD |
| Build Surface | 130x160mm |
Parts and Supplies
| Item | Notes | Cost | Source |
|---|---|---|---|
| BuildTak build surface | 130x160mm. Make 1/4" holes in the corners for access to leveling screws. 6.5"x6.5" can be cut down to 5 1/8" x 6 1/4" | $20 (3) | MatterHackers |