Time and Location:

7pm ET Virtual Meeting https://meet.google.com/ica-fdvh-jje

Call to Order:

Meeting called to order by (NAME HERE) at (TIME HERE).

Consent Agenda

Any Board Member may make a motion in the Consent Agenda.  The purpose of the Consent Agenda is to propose motions that have been discussed by Board Members in advance and/or are expected to pass without objection.  If the item does not fit this description, it should be proposed in New Business. Discussion of Consent Agenda items should be done via Slack prior to the meeting.  Any Board Member present at the meeting may request that an item be moved from the Consent Agenda to New Business.  The motions in the Consent Agenda (after any items are moved to New Business) may be passed as a group if there are no objections.  Any motion that requests spending $250 or more must include a section on "Relevance to our tax exempt purpose".

CA1: Reimbursement for Donation Moving Expenses (Brad Hess)

Issue: Due to the timing and how this came together Brad was not able to put this before the board before it happened as I was coordinating with space and room managers and also getting help from members to facilitate the move for the following equipment donated to Makersmiths: 

1. 4x8 Plasma table which is an industrial unit much better then our home made version
2. new Burr king sander (Retail approx. 3k)
3. All terrain pallet jack (Retail 1.7k)
4. Sheet metal Shear
5. Storage bins
6. Welding table with vise, clamps, etc.

Solution: Reimburse 275.00 for the tow truck and trailer rental

Relevance to Tax Exempt Status: None

Motion: Move to reimburse Brad Hess for 275.00 for tow track and trailer rental associated with acceptance of the donation above.

CA2: Open Board Position (Scott Silvers)

Issue: One of our Directors, Jessee Maloney, resigned her Director position.  The Board can either:  a) move to hold a special election and fill the seat through the remainder of Jessee Maloney's term (mid-2025) or b) move to have 6 director seats until the next Annual Meeting of the Membership and use that election to return to 7 directors.  For a special election to take place, notice to Membership is required, and a quorum must be reached for the election to take place.

Solution: Leverage the voting tools and processes from the 2024 election (as administered by the Secretary) to solicit candidates and provided at least one candidate submits the nomination form, proceed with election.

Relevance to Tax Exempt Status: NA

Motion: Move to direct the Secretary to manage an election for the recently vacated seat in accordance with Makersmiths Bylaws, including communications with the Membership and setting dates for nominations and voting.

CA3: Update Machine Fees in Standing Rules (Jonathan White)

Issue: The Board approved charges for machine use and materials approved at the June Board Meeting are confusing because the BN2-20 are labeled as being part of the UV Printer. There is also one type of Eco Solvent (BN2-20) material that was not added to the list.

Solution: Update the Standing Rules with the following table that:

• Separates out the LEF-200 and the BN2-20 pricing
• Renames the BN2-20 material lines with simpler descriptions
• Adds a line for White Sticker Vinyl that was missing at the same price as the Clear Sticker Vinyl - $2.00

Relevance to Tax Exempt Status: None

Motion: Move to update the Standing Rules charges section so that it matches the able above. 

CA4: Appointment of Chairperson of the Bylaws and Standing Rules Committee (Jonathan White)

Issue: Jonathan White has not had the time to devote to the Bylaws and Standing Rules Committee. Jennifer Chu has been organizing the agenda, running the meetings, taking notes, etc.

Solution: Nominate Jennifer Chu to be the Committee Chair of the Bylaws and Standing Rules Committee.

Relevance to Tax Exempt Status: None

Motion: Move to appoint Jennifer Chu as the Committee Chair of the Bylaws and Standing Rules Committee.

CA5: Set Red Tool Class for "Lighting the Forge" Red Tool Class (Jonathan White)

Issue: The Board voted to implement the policy that all Red Tool classes should be cost $40 minimum. Exceptions can then be handled on a case by case basis. The “Lighting the Forge” class is a 10-15 minute class and does not warrant a $40 cost per person cost. There has been discussion that the class should be more than just about how to light the forge, and there are more in-depth blacksmithing make and take classes. However for those people that know how to blacksmith already and just want to use the tools, forcing them to take a longer $40 class isn’t practical and is off putting. The class doesn’t impede on other classes in the same space. If there is a more in-depth, longer, $40 class in the future, an exception to the standard $40 fee for this class can of course be revisited.

Solution: Adopt a $5 per person “Lighting the Forge” class charge.

Relevance to Tax Exempt Status: None

Motion: Move to approve the “Lighting the Forge” class to charge $5 per person. 

Approval of Prior Minutes

2024-06-26 Meeting of the Board of Directors

2024-07-03 Special Meeting of Board of Directors

Vote:

Officer Reports

Chairperson:

Electronic voting allowed via https://law.lis.virginia.gov/vacode/title13.1/chapter10/section13.1-865/ as long as it does not conflict with bylaws. 

Secretary:

Minutes updated from 2024-06-26 Meeting of the Board of Directors and 2024-07-03 Special Meeting of Board of Directors

Up to speed on election process for board members.

Treasurer:

President:

INSERT REPORT HERE

Committee Reports:

Membership Committee (Open)

Marketing Committee (VACANT)

Jason Gilligan has resigned from Chair of the Marketing Committee

Website Committee (Maggie Toth)

Leesburg Facility Committee (Jessee Maloney)

Purcellville Facility Committee (Dave Painter)

• Request MSP start garbage service

Scheduling Committee (Jennifer Chu)

Newsletter Committee (Melissa Kowalski)

IT Committee (Scott Silvers)

Maintenance Committee (Dave Painter)

STEM Committee (Diane Painter)

Standing Rules Committee (Jonathan White)

Unfinished Business

OB1: TITLE (Person Proposing)

Issue:

Solution:

Relevance to Tax Exempt Status:

Motion:

Vote: xxx

New Business

NB1: Increase to the Leesburg Supplies budget (Scott Silvers)

Issue: The Leesburg Steward, on the advice of the Treasurer, has requested that the Leesburg Supplies budget be increased by $1000 to cover the cost of an addition set of ink cartridges for the BN2-20 printer and the SG1000 sublimation printer.
Solution: Add $1000 to the Leesburg Supplies budget

Solution: Increase the Budget

Relevance to Tax Exempt Status: NA

Motion: Move to add a one-time increase of $1000 to the Leesburg Supplies budget.

Vote: xxx

NB2: Fiber Laser Purchase (Jonathan White)

Issue: A capability regularly requested by Members is to be able to engrave on metal. 

Solution: Approve the purchase of a fiber laser as outlined in the linked presentation: https://docs.google.com/presentation/d/1D7rPUFevPfneaD86LsJY63CZQo9Z-yD4gAap_nQW5lQ/edit?usp=sharing
Relevance to Tax Exempt Status: None

Motions: 

Motion 1: - Move to approve the purchase of the fiber laser from Diane Bollinger as outlined in the presentation material accompanying this motion.  Funds to be allocated from the Equipment Reserve budget.  Any saved or remaining funds after items in the presentation are purchased may be used towards the purchase of other components, blanks or equipment to support the fiber laser, or returned.  Any funds not spent within 3 months of laser purchase will be returned to the Equipment Reserve budget.

Motion 2: Move to designate the approved Fiber Laser as a Red Tool requiring training and sign off before use.

Motion 3: Move to approve the usage fee for the fiber laser of $10 per hour and update the Standing Rules fee table accordingly.

Motion 4: Move to appoint Jonathan White as the Fiber Laser Steward.

Motion 5: Move to approve the limitations on machine use to be the same as the current CO2 laser restrictions.  2 hours per day, 8 hour per week, unless otherwise authorized by the steward.

Vote:

NB3: Print Fee for the Cannon Photo Printer in Purcellville (Jonathan White)

Issue: There is no approved per page print fee for Cannon Photo Printer at Purcellville.  This is new equipment without a use fee structure.

Solution: Set the Cannon Photo Printer fee at $4 per printed sheet.  This will be using either space provided paper or user provided paper.  There is some paper in the space but the space does not intend to have all varieties and all sizes available at any time.  What we have will be what we have.

Relevance to Tax Exempt Status: None

Motion 1 - Move to waive 7 days notice to consider the motion.

Motion 2: Move to set the machine use fee for the Cannon Photo Printer at Purcellville at $4 per printed sheet and to update the Standing Rules use fees accordingly.

Open Discussion

Downstairs development plan https://docs.google.com/presentation/d/1D-D2ljjZ0fh_tdqQkGLHNjBDCBvyXbflCORyTphwtuA/edit?usp=sharing

Treasurer report on snack policy, budget policy, and June 2024 financial statement

Report of BN-20 income and expenses

Adjournment

Meeting adjourned by NAME at TIME