Plasma Table Description, Operation, and Gcode stuff.
Plasma Table Checklist
Plasma Table Settings
Link to the Plasma CNC Table Video walk-through.
How to get Gcode for the Plasma Table from Vcarve
Vcarve is installed on the Plasma Table computer (and also in the Green Room).
This is a short video on how to take an .svg drawing, import it into Vcarve, and save the Toolpath Gcode to the machine.
Ideally, your saved Gcode files should be in the Makersmiths Users Code folder under a folder with your name.
Gcode files may be loaded via USB drive to your folder.
The Plasma Table computer is connected to the internet, so you may be able to load your file from wherever.
https://www.dropbox.com/scl/fi/w01et736en9hxfsnjixjm/Vpcnc4.mp4?rlkey=h56q1lhwbgmmc36brxbjjt0mp&dl=0