We currently (2/24/18) have 4 3D printers in the 3D printing room in MS-L. They each have their own method for printing.
Table of Contents | ||||
---|---|---|---|---|
|
MonoPrice IIIP (Also known as the MonoPrice Select Plus)
Slicer |
---|
File Type: gCode - Marlin/Sprinter/RepRap
...
Cura | |
File Type | gcode |
---|---|
Material | PLA or ABS |
Interface | OctoPi @ http://10.0.3.75 |
...
PrintrBot Simple Metal
File Type: gCode - Marlin
...
UserId/Password |
---|
PrintrBot Plus
Slicer | Cura |
---|---|
File Type | gcode |
Material | PLA or ABS |
Interface | Repetier @ http://10.1.1.21 |
...
UserId/Password | makersmiths/makesomething2day |
---|
FlashForge Creator Pro
...
Slicer | FlashPrint |
---|---|
File Type |
...
x3g | |
Material | PLA or ABS |
Interface | OctoPi @ |
...
UserId/Password |
---|
...
Rostock MAX v2 (Also called Delta Bot, SeeMeCNC)
...
Slicer | |
---|---|
File Type |
...
This printer is hardwired to the desktop printing station. The bed leveling is software based in their MatterControl software and is easier to use from there. You can also use Simplify3D (on loan from Sean Devine) which has a direct print button on it.
We currently (2/24/18) have 4 3D printers in the 3D printing room in MS-L. They each have their own method for printing.
MonoPrice IIIP (Also known as the MonoPrice Select Plus)
File Type: gCode - Marlin/Sprinter/RepRap
gcode | |
Material | PLA or ABS |
Interface | OctoPi @ |
...
Printrbot Simple Metal
This printer uses the Repetier Print server at http://10.1.1.21 The login is makersmiths/makesomething2day
FlashForge Creator Pro
This printer has a Rasbperry Pi running Octoprint attached to it. You access the printer by going to http://10.0.3.75. Once there you can follow the OctoPrint instructions.
UserId/Password |
---|
...
This printer is hardwired to the desktop printing station. The bed leveling is software based in their MatterControl software and is easier to use from there. You can also use Simplify3D (on loan from Sean Devine) which has a direct print button on it.