You are viewing an old version of this page. View the current version.
Compare with Current
View Page History
« Previous
Version 5
Next »
We currently (2/24/18) have 4 3D printers in the 3D printing room in MS-L. They each have their own method for printing.
MonoPrice IIIP (Also known as the MonoPrice Select Plus)
Slicer | Cura |
---|
File Type | gcode |
---|
Material | PLA or ABS |
---|
Interface | OctoPi @ http://10.0.3.75 |
---|
UserId/Password | |
---|
Slicer | Cura |
---|
File Type | gcode |
---|
Material | PLA or ABS |
---|
Interface | Repetier @ http://10.1.1.21 |
---|
UserId/Password | makersmiths/makesomething2day |
---|
FlashForge Creator Pro
Rostock MAX v2 (Also called Delta Bot, SeeMeCNC)
Slicer | |
---|
File Type | gcode |
---|
Material | PLA or ABS |
---|
Interface | OctoPi @ http://10.0.3.75 |
---|
UserId/Password | |
---|
This printer is hardwired to the desktop printing station. The bed leveling is software based in their MatterControl software and is easier to use from there. You can also use Simplify3D (on loan from Sean Devine) which has a direct print button on it.