...
The Monoprice controller will take power from the Rasperry Pi over USB and appear to be operational even if the main power supply is turned off. If the printer will not heat, check the power switch on the power supply.
Specifications
Size | 210x210x200mm |
---|---|
Extruder | Single 0.4mm |
Drive | Direct |
Heated Bed | Yes |
Resolution | 100 microns (0.1mm) |
Filament | 1.75mm |
Materials Supported | PLA, ABS |
Formats | |
Software | Cura, Slic3r |
Connections | Octopi @ http://10.3.0.75 |
...