...
Unplug the printer.
Place a prominent note on it describing the problem.
Let someone know through the #3dprinters channel on Slack.
Files Advanced:
Use this to re-flash the Printrbot plus if needed, Configured specifically for its version of printrboard.
Specifications:
- 120mm x 130mm x 120mm (X-Y-Z) build dimensions
- 90mm/s x 90mm/s x 3mm/s x 30mm/s (X-Y-Z-E) Max movement rates
- 1.75mm filament
- 0.4mm nozzle
- Max Bed Temperature 150*C
- Max Nozzle Temperature 275*C
- Baud-rate 115200
...