...
- Help go through the boxes of supplies from the old classroom in the main room and find proper homes for them
- Remove anything from electronics that doesn't belong in electronics! Find the proper home for each item, do not just stick it somewhere else.
Room Specific Lists:
- NEW 3D Printing
Finish laying rubber tiles in the new 3D printing room
wet Swiffer the rubber tiles
NEW Cosplay:
NEW Electronics:
Paint walls
paint and supplies can be found at the top of the basement stairs or in the room if someone did the task from abovealready finished that task.
NEW Printmaking:
Sewing & Craft Area:
Main Room:
sweep and vacuum
- Swiffer deep inside of laser
- move the long table in the main room back to where it was and fix the supports on it
dust and wipe down all glass surfaces
this includes computer screens and the top of the laser cutter and UV printer
New NEW Classroom
Wipe down the walls
pack up the resin printer supplies supplies
hang 55" tv in the middle of the back wall
supplies for possibly mounting to concrete will be available
Metal Shop
patch the large hole in the wall behind the jewelry bench (supplies labeled and on tall table in main room)
wipe down the jewelry bench and surrounding areas of red powder coating powder
Woodshop
vacuum floor and around machines
empty the trash cans
Woodturning
vacuum floor and around machines
Bathrooms
wipe down the sinks
- dust bathroom vents
wipe down the toilets
Swiffer the floors
empty the trashcans
Building Specific List:
- Wipe down all windows
in the room between wood lathe and woodshop, move shelving so it is flush with left wall, remove flammable box and everything on top of it (to where? help us decide)
tape off area around breaker outside woodshop ( 15" horizontally from center of box on each side, and 36" from front of box, 6'6" tall)
- Please use yellow and black hazard tape that can be found on tall table in main room
- repair the step at the back door
- do we have supplies on hand?
- install molding at bottom of stairs
- (it should be somewhere shoved in the corner of cosplay)
- mount mike wherlingMike Werling's American flag above the finishing room door.
- please secure it well.
- sweep and swiffer stairs
- adhere rubber tiles to top and bottom of stairs
- adhesive and tiles can be found on tall table in main room
- empty all shopvacs (CNC, woodshop, laser)
- wash the trash can lids
- slop sink would work best & rags are in the supply closet
- drain all the compressors in the building (laser, woodshop, metal shop)
- Carry down the 5-gallon kilz paint bucket from top of stairs
- vacuum all carpeted areas
- carry short stools to new classroom in basement, only the short ones!
- move ceramics stuff to Purcellville ceramics room!!
...