Time and Location:
June 30, 2021 at Virtual Meeting - 7:00pm
Call to Order
Call to Order
|
|---|
Consent Agenda
Newly proposed agenda items appear in the consent agenda. Any member present at the meeting may pull an item out of the consent agenda for discussion, at which point it goes under "New Business". If nobody objects to the solutions presented by the consent agenda, everything in the consent agenda passes by consensus. Items that have more than one proposed solution should be moved to the "New Business" section.Any member may propose an item on the agenda. However, discussion of agenda items should be done via Slack. The cut-off time for addition to or revision of the consent agenda items is 48 hours prior to the meeting. Please note, agenda items (Consent, New, or Old) that request spending $250 or more must include a section on "Relevance to our tax exempt purpose".
CA1: (@NAME)
Issue:
Solution:
Relevance to Tax Exempt Status:
Motion:
Discussion:
CA2: (@NAME)
Issue:
Solution:
Relevance to Tax Exempt Status:
Motion:
Discussion:
CA3: (@NAME)
Issue:
Solution:
Relevance to Tax Exempt Status:
Motion:
Discussion:
Officer Reports:
Chairman:
Secretary:
Treasurer:
Financial Statement:
Member Reports:
ommittee Reports:
New Member Orientation Committee (Chairperson Jessee Maloney)
Website Committee (Chairperson Jessee Maloney)
Membership Committee (Chairperson Scott Newman
Leesburg Facility Committee (Chairperson Brad Hess)
Purcellville Facility Committee (Chairperson Tom Hill)
Scheduling Committee (Chairperson Diane DeMott Painter)
Special Projects Committee (Chairperson Mike Werling)
Welding Committee (Chairperson Arthur 'Skip' Smith))
Newsletter Committee (Chairperson @Melissa Kowalski)
IT Committee Chairperson Michael James)
Video Committee (Chairperson Adam "Squirrl" McClintock)
Custom Frame Shop Committee (Chairperson user-17f4a)
Radio Club Committee (Chairperson Allon Stern )
Marketing Committee (Scott Acting Chair)
Old Business:
OB1: Machine Access Controls (James Waldron)
Problem: We are not currently able to gather machine operating hours or control machine access. Anyone can use any machine whether they have taken Red Tool training or not. This sometimes leads to machine damage and expensive repairs. Lack of usage information means that preventive maintenance is not related to actual machine time, may be overdue, or be performed too often.
Solution: Fit select machines with access controls. Device to allow only authorized users and to log usage information. There are both home grown and commercial options available. Home grown solutions are less expensive but initially have fewer features. Commercial options are more expensive but more fully featured. Integration with our existing systems and data stores are likely easier for home grown solutions, possibly harder for commercial solutions.
Relevance to our tax exempt status: None
Proposed Motion: Adopt Machine Controls for Select Machines. Establish a small Machine Control committee to; determine which machines need to be controlled, investigate the current commercial and home grown solutions and select 3, present those to the Board at the February meeting. The Board to select a solution at the February meeting.
Discussion: Jim says he probably has enough parts to build some working prototypes. Dave - would like to see building a few of these and putting them in place and testing. We almost had to buy a new tablesaw this week given the Delta organization being onsold multiple times. This would have been $250 in parts that aren't available anymore. Jim said it would be made available for Android and iPhone and you would use an app. It would enable the machine for an hour at a time and sense current that would then extend the machine on time automatically.
Amended Proposed Motion: Establish a small Machine Control committee to test a machine control solution and present the results and proposed costs to the Board at the February meeting.
Vote: Unanimous in favor.
Follow up on 02-24-2021: Delays due to snow storms but not ready to demo yet.
Follow up on 03-31-2021: Jim showed the prototypes. Dave suggested we put it on table saw in Pville. One could be repurposed to make a 3 phase version. Nothing to vote on at this time.
Follow up on 04-28-2021: Dave suggests putting it one on table saw and one on the miter saw for testing purposes. Jim will get prototype up and running in the next few weeks.
Follow up on 05-26-2021: First unit ready to go for beta period. Has an override button it during trialing. Need a couple of static IP addresses for Purcellville. One for table saw and one for mitre saw.
New Business:
NB1: (@NAME)
Issue:
Solution:
Relevance to Tax Exempt Status:
Proposed Motion: