You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Next »

Time and Location:


7pm ET Virtual Meeting https://meet.google.com/ica-fdvh-jje

Call to Order:


Meeting called to order by (NAME HERE) at (TIME HERE).

Board/Officer NamePositionTermAttendance (Y/N)
Jonathan WhiteBoard Member, Chairperson2023-2026
Bev MurdockBoard Member, Secretary2021-2024
Scott NewmanBoard Member2021-2024
Mike DeWanBoard Member2021-2024
Brad HessBoard Member2022-2025
Jessee MaloneyBoard Member2022-2025
Scott SilversBoard Member2023-2026
John DubelkoTreasurer2023-2024
Adam "Squirrl" McClintockPresident2023-2024

Consent Agenda


Any Board Member may make a motion in the Consent Agenda.  The purpose of the Consent Agenda is to propose motions that have been discussed by Board Members in advance and/or are expected to pass without objection.  If the item does not fit this description, it should be proposed in New Business. Discussion of Consent Agenda items should be done via Slack prior to the meeting.  Any Board Member present at the meeting may request that an item be moved from the Consent Agenda to New Business.  The motions in the Consent Agenda (after any items are moved to New Business) may be passed as a group if there are no objections.  Any motion that requests spending $250 or more must include a section on "Relevance to our tax exempt purpose".

CA1: Appointment of Co-steward for Lower Building Multipurpose Craft Room  (Scott Silvers)

Issue: Last month we appointed Ken Fuentecilla as steward for the Lower Building Multipurpose Craft Room.  Dawn Martin has volunteered to assist Ken.

Solution:  Appoint Dawn Martin as co-steward for the Lower Building Multipurpose Craft Room 

Relevance to Tax Exempt Status:  None

Motion:  Move to appoint Dawn Martin as co-steward for the Lower Building Multipurpose Craft Room 

Vote: XXX

CA2: Memory Upgrades for Leesburg Computers  (Scott Silvers)

Issue: While installing CorelDraw 2023 it was observed that the small form factor computers were bought with only 8 GB of memory, which is the bare minimum to run CorelDraw 2023. There are also products in the Adobe Suite we've purchased that require more than 8 GB to be installed.  More memory will allow for improved performance for users of CorelDraw and the ability to install the remaining Adobe products we're paying for.

Solution:  Purchase 2 64GB memory kits (~$107/ea) to upgrade the Classroom and UV Printer computers.  Transfer the 8 GB memory sticks to the 3D Printing and Basement computers to bring those up to 16 GB 

Relevance to Tax Exempt Status:  None

Motion:  Move to add $235 to the IT Budget for the purchase of additional memory. 

Vote: XXX

Approval of Prior Minutes

2023-07-26 Meeting of the Board of Directors

Vote:

Officer Reports


Chairperson:

INSERT REPORT HERE

Secretary:

INSERT REPORT HERE

Treasurer:

INSERT REPORT HERE

President:

INSERT REPORT HERE

Committee Reports:


Membership Committee (Scott Newman)

Marketing Committee (Jason Gilligan)

Website Committee (Maggie Toth)

Leesburg Facility Committee (Jessee Maloney)

Purcellville Facility Committee (Dave Painter)

Scheduling Committee (Jennifer Chu)

Newsletter Committee (Melissa Kowalski)

IT Committee (Scott Silvers)

Maintenance Committee (Dave Painter)

STEM Committee (Diane Painter)

Standing Rules Committee (Jonathan White)

New Business


NB1: Membership Chair Responsibilities (Scott Newman)

Issue:  

For over three years Makersmiths has been holding online New Member Orientations (NMOs) twice a month on alternating Mondays. There was a request by a volunteer back in the spring to hold in-person NMOs to build community and because some new members indicated that would be their preference. The Chair agreed to add in-person sessions in addition to the regularly scheduled online sessions. The volunteer did not see the need for the additional sessions. At the August 9 Membership Committee Meeting volunteers proposed that all NMOs be held in person. The proffered reasons were to build community, and that anyone could join and get access to the spaces without having met anyone in person and "back a truck up" and empty out the spaces. The Chair was opposed to the change, with concerns about convenience and accessibility (for new members and volunteers), and changing established processes (NMOs have been free and online, every other Monday evening). The proposal was modified to state "Makersmiths will have two New Member Orientations per month, where at least one will have an in-person component and at least one will have an online component. An NMO may have both components at the discretion of the instructor.".
This raises several questions:

  • Is this change within the scope of duties of the Membership Chair?
  • Is it within the scope of the Membership Committee?
  • What constitutes the Membership Committee? When it was created at the February 24, 2021 Board Meeting it was "Scott Newman as its Chair and Saadiq Hasan, Anthony Lesink, Jessee Maloney, and Scott Newman as its members.". What is the process for adding/replacing members?
  • Does volunteering or simply participating in Committee meetings give rise to some claim on that delegation of responsibility from the Board?
  • These questions extend beyond the immediate questions in the Membership Committee to the broader instantiation of Commmittees and Stewards. Does participating in the Finance Committee give volunteers the power to direct the Treasurer in the financial affairs of the Corporation?

The management of the business and the conduct of the affairs of the Corporation are vested in its Board of Directors. Certain of the responsibilities have been delegated to Officers, Committee Chairs, and Stewards by appointment of the Board. It seems to me that the routine operation of the Corporation would be subject to the variable preferences of volunteers.  Please don't misunderstand, I believe our volunteers are well-meaning and well-intentioned, and are the lifeblood of the Corporation, and should be valued for their contributions. But the orderly operation of the Corporation requires clarity in the ongoing decision-making.
Solution: The Board should provide clarification about how it wishes the Corporation to operate. The Membership Chair is seeking guidance from the Board in the form of the following notional motions.

Solution:  Clarify Membership Chair responsibilities through approval of a series of motions.

Relevance to Tax Exempt Status:  The Board must maintain proper operational control of the Corporation to avoid jeopardizing our Tax-exempt status.

Motions:

  • NB1A:  The Board directs the Membership Chair to notify the Board of, and obtain approval for, any material change in Membership requirements.
    Vote: XXX
  • NB1B:  The Board directs the Membership Chair to maintain the previous schedule of New Member Orientations (free and online, every other Monday evening). This does not preclude an in-person element, nor does it preclude additional in-person sessions, it just maintains 2 online sessions on alternating Monday evenings.
    Vote: XXX
  • NB1C:  The Board-appointed Officer, Chair, or Steward is the arbiter of any decision made within their delegated duties. Any disagreement may be raised through the President or Board Chair for presentation to and resolution by the Board.
    Vote: XXX

NB2: Add Dye Sublimation Capabilities to Leesburg (Jessee Maloney)

Issue:  Makersmiths was donated an Epson printer, which we attempted to hack into dye sublimation printer due to popular demand for such a capability.  After copious volunteer hours, the effort resulted in mixed but briefly-lived success.  It proved out the concept and reaffirmed the user demand.  However, the printer is end of life and no longer functions.  

Solution:   Procure a new purpose-built dye sublimation printer along with recommended accessories and required supplies (bundled cost estimated at $2600-2800).

(presentation will accompany motions)

Relevance to Tax Exempt Status:  None

Motions:

  • NB2A:  Move to procure a die sublimation printer consistent with configuration and accessories as outlined in the presentation for an amount not to exceed $2800
    Vote: XXX
  • NB2B:  Appoint Jessee Maloney as Dye Sublimation tool steward
    Vote: XXX
  • NB2C:  Direct the tool steward to develop training materials, red tool class schedule, and proposed usage and class fees and present to the Board at the next meeting.
    Vote: XXX

NB3: TITLE (Person Proposing)

Issue:

Solution:

Relevance to Tax Exempt Status:

Motion:

Executive Session


Adjournment


Meeting adjourned by NAME at TIME

  • No labels