We currently (9/1/18) have 4 3D printers in the 3D printing room in MS-L. They each have their own method for printing.
How to use the Repetier print server
How to use the Octoprint print server
MonoPrice Maker Select Plus IIIP
Slicer | Cura |
---|---|
File Type | gcode |
Material | PLA or ABS |
Interface | OctoPi @ http://10.3.0.75 |
UserId/Password |
PrintrBot Simple Metal Extended
Slicer | Cura |
---|---|
File Type | gcode |
Material | PLA or ABS |
Interface | Repetier @ http://10.1.1.21 |
UserId/Password | makersmiths/makesomething2day |
FlashForge Creator Pro
Slicer | FlashPrint |
---|---|
File Type | x3g |
Material | PLA or ABS |
Interface | OctoPi @ http://10.3.0.165 |
UserId/Password | ??? |
Rostock MAX v2 (Also called Delta Bot, SeeMeCNC)
Slicer | |
---|---|
File Type | gcode |
Material | PLA or ABS |
Interface | Repetier @ http://10.1.1.21/ |
UserId/Password | makersmiths/makesomething2day |
This printer is hardwired to the desktop printing station. The bed leveling is software based in their MatterControl software and is easier to use from there. You can also use Simplify3D (on loan from Sean Devine) which has a direct print button on it.