The Elegoo Mars is an SLA Printer which prints from a vat of liquid resin versus using a hot end and plastic filament.
This is the printer we are using - https://amzn.to/3fcxhUr
Some of the basic Items you will need for using the Elegoo Mars
- Resin - Comes in three types
- ABS Like
- https://amzn.to/35tfu7c - Elegoo - Lots of colors
- https://amzn.to/3gTSsvw - Siraya Tech - Tenacious - Add about 15% of this to your other resin to make it really strong
- https://amzn.to/3gMvmXm - Siraya Tech - Fast - a fast curing resin with ABS like properties
- Standard
- https://amzn.to/2YskHuu - Elegoo - Lots of Colors
- Water Washable
- https://amzn.to/35o5Anf - Elegoo - A Few Colors
- High Resolution
- https://amzn.to/2zKrhTc - Siraya Tech - Blu - High resolution transparent blue color - Needs a higher ambient temperature 77o or higher.
- ABS Like
- Washing
- 99% Isopropyl Alchohol - https://amzn.to/3gJqIc5
- Filters and Funnel
- To get the resin back in the bottle
- https://amzn.to/3d9B4zY
- Resin Tank
- It's easiest if you have your own tank(s) You simply close them up and swap them out.
- Two Pack of Resin Tanks - https://amzn.to/2YpOxj3
- FEP Film Sheets
- This is the clear plastic on the bottom of the tanks, they do wear out or get scratched and need to be replaced.
- FEP Sheets, Pack of 5 - https://amzn.to/3bXUFTK
- Build Plate
- It's nice to have your own, so you can just swap and go if there is a print waiting for someone to take it off.
- Build Plate - https://amzn.to/2VTWCLo
- Standard set of tools for 3D prints
- precision wire cutters - https://amzn.to/2ycxcQa
- or narrow tip type - https://amzn.to/2KRDwz5
- scraper - https://amzn.to/3aZMhlc
- or razor blade since it's a solid metal bed - https://amzn.to/35tfap0
- USB Drive - MicroCenter in Fairfax
- precision wire cutters - https://amzn.to/2ycxcQa